Water proofing prolongs the lifespan of your building by limiting ways that water and moisture can enter through ceiling, walls or floor.
If these areas are well protected from water intrusion, the structure can avoid damage such as rust, rotting, corrosion and deterioration.
Waterproofing in buildings is the formation of an impervious barrier over surfaces of foundations, roofs, walls and other structural members of building to prevent water penetrations through these surfaces. The building surfaces are made water-resistant and sometimes waterproof.
Waterproofing membranes create seals that prevent water migration between the membrane and the structure in every direction. Preapplied sheet membrane waterproofing that forms an integral bond to poured concrete for horizontal and vertical applications. The pre-applied membranes to adhesively bond to the foundation and shield buildings from water and damaging gas, vapor and moisture.
Two component hybrid polyurethane waterproofing membrane the combination of both these in a specific design ratio creates a liquid hot applied coating for waterproofing applications. Polyurethane is a rather popular choice due to its ease of installation. It is highly reactive and can only be applied by special, two component spray equipment, and spray for general waterproofing applications such as Terrace, Landscaping, car park decks, podium decks and cut and cover tunneling.
Single component hand applied polyurethane membrane system provide an easy, fast and sure system for waterproofing and protection of Old & New roofs, Balconies, terraces and Planter area. These are the kind of membranes that come in the form of liquid that can be sprayed or brushed onto the surface. By spraying, the liquid forms a monolithic membrane, with no laps, welds or seams
Two component cement based waterproofing and concrete protection system for specialized structures like dams, bridges, culverts, tunnels and all hydraulic structures where the water pressures are very high .It is fully suitable for normal waterproofing requirement of terraces, park places, basement, Swimming pools, sanitary areas etc. When two components are mixed and applied, the film formed is thick elastic membrane with degree of abrasion and chemical resistance. It is most suitable for protection from chloride attacks.